Ó³¿ÍÖ±²¥

1:Crushing
The loader feeds the raw ore into the vibrating feeder. The vibrating feeder conveys the material evenly into the jaw crusher for the preliminary crushing process. The beneficiation process may incorporate a cone crusher or hammer crusher for secondary crushing when necessary to achieve optimally sized particles.
Required equipment; vibrating feeder, jaw crusher, cone crusher or hammer crusher

2:Grinding
The crushed material passes through the vibrating screen into the ball mill, through the mill for fine treatment
Required equipment: ball mill, spiral classifier

3:Separation
Copper ore flotation: the slurry is fed into the flotation machine. Add the chemicals Ó³¿ÍÖ±²¥ mix thoroughly to select the useful ore powder. Aerated by stirring, so that the mineral particles selectively fixed in the air bubbles on top. Floating to the surface of the slurry is scraped out to form a foam product. The rest of the slurry is retained in the slurry, in order to achieve the purpose of separating the minerals
Required equipment: flotation machine, shaking table

4: Drying
The obtained copper powder is fed into the desiccant for drying to get the required material.

The selection Ó³¿ÍÖ±²¥ combination of these equipments depends on the nature of copper ore, beneficiation process Ó³¿ÍÖ±²¥ production scale Ó³¿ÍÖ±²¥ other factors. Engineers typically select Ó³¿ÍÖ±²¥ configure equipment based on specific conditions in practical applications to achieve optimal beneficiation results Ó³¿ÍÖ±²¥ economic benefits.